Interior insulation has a fundamental problem: every centimetre of insulation reduces your room. THERMOSHIELD NANO PLATINUM INTERIOR does not. It is applied in a single coat of 3\u20134 mm<\/strong> \u2014 thinner than a tile \u2014 and achieves a thermal insulating effect that would otherwise require bulky insulation.<\/p>\n The ceramic nanoparticles dispersed in the mass form, when dry, a continuous heat-reflective structure that returns up to 93 %<\/strong> of the thermal radiation that would escape through the wall to the interior. Heat is distributed evenly: the typical feeling of a “cold wall in a warm room” disappears. Product compliant with EN ISO 13786 standard.<\/p>\n Mould grows where moist air condenses on a cold surface: in corners, door jambs, behind wardrobes. This plaster addresses the cause, not the symptom: it raises the surface temperature of the wall to prevent condensation and also protects the surface against mould and microorganisms. It is fully breathable: the wall keeps breathing.<\/p>\n Once cured it forms an extraordinarily hard and wear-resistant structure \u2014 it withstands daily use in hallways, stairs, children’s bedrooms or commercial spaces, unlike soft insulation boards under plasterboard.<\/p>\n Masonry, concrete, plasterboard, OSB, wood, metal and sheet metal. The substrate just needs to be level, cohesive and dry. Also ideal for remediation of thermal bridges where classic insulation does not fit: door and window jambs, lintels, pillars, metal structures.<\/p>\nHow it works<\/h3>\n
End to mould in corners and behind furniture<\/h3>\n
Hard surface that lasts<\/h3>\n
Bonds to almost any substrate<\/h3>\n
Key properties<\/h3>\n
\n
Technical data<\/h3>\n