THERMOSHIELD REFLEX PREMIUM

Insulate your home with a roller

Classic insulation slows down heat; THERMOSHIELD REFLEX PREMIUM reflects it. The hollow glass microspheres dispersed in the paint form, once dry, a continuous heat-reflective layer that acts like a mirror for infrared radiation: the heat that would escape through the wall bounces back into the room. That is why lambda value or U coefficient are not indicated — they cannot be measured in a layer of tenths of a millimetre. What is indicated instead is the proportion of thermal radiation reflected: up to 87 %.

Winter: warmer rooms with lower boiler heating

A cold wall steals your heat even if the thermometer reads 22 °C. This paint raises the surface temperature of the walls: the space heats up faster and the thermal sensation is greater with less heating. Every degree less on the thermostat shows directly on your energy bill.

Summer: end of overheating

The high-reflectivity white surface bounces solar radiation back before it heats the facade. On south-facing walls, attics and rooms under flat roofs, the need for air conditioning drops noticeably.

Goodbye to mould and damp corners

Mould appears where moist air condenses on a cold wall. By raising the surface temperature, condensation disappears or is drastically reduced. The paint also incorporates enhanced anti-mould protection; outdoors it prevents algae and moss, and thanks to the lotus-flower effect the surface self-cleans in the rain.

Where it works best

Wherever contact insulation is not viable or not cost-effective: historic buildings and facades with mouldings, stone walls, listed buildings, apartment blocks, basements, garages and remediation of thermal bridges (door and window jambs, lintels, corners, floor-slab junctions).

Key properties

• Reflects up to 87 % of thermal radiation
• Reduces heating costs in winter and cooling costs in summer
• Raises surface temperature and eliminates condensation
• Active protection against mould; outdoors against algae and moss
• Self-cleaning lotus-flower effect on facades
• Fully breathable, with extremely low water absorption
• High resistance to UV rays and weathering
• Washable and durable once cured
• Applied with roller, brush or spray — within reach of any DIYer

Technical data

Formats

• 5 kg — covers approx. 13 m²
• 18 kg — covers approx. 45 m²

📄 Technical data sheet (ES) — PDF
📄 Technical data sheet (EN) — PDF

The product contains biocides with anti-mould properties. Harmful to aquatic organisms, with long-lasting effects. Contains 2-octyl isothiazol-3(2H)-one: may trigger an allergic reaction. Before use, consult the technical data sheet and the safety data sheet.